How To Enlarge Screen On Windows 10

How to use the Magnifier

To enable the Magnifier, press the Windows logo key and + (plus). On touch-enabled devices type "magnifier" in the search box and press enter. Select Magnifier from the results to turn it on.
The magnifier controls volition announced onscreen.
Use the following controls to change the level of magnification:
- To zoom in: Press the Windows logo key and + (plus). Or select the + (plus) push button on the Magnifier controls.
- To zoom out: Press the Windows logo key and - (minus). Or select the - (minus) button on the Magnifier controls.
- You can also change the level of magnification using the scroll bicycle on a mouse or trackpad gestures while holding down the Ctrl + Alt keys.
- To get out the Magnifier, press the Windows logo cardinal + Esc. Or select the X (close) push in the top-correct corner of the Magnifier controls.

Note:When you launch the Magnifier once again, information technology will use the zoom level from when information technology was final open.

The 3 Magnifier views

There are three Magnifier views to cull from: Total screen, Lens, and Docked (total descriptions below). By default, Magnifier uses the Total screen view. To modify the view, press Ctrl + Alt + M to cycle through views. Yous can also change the view in the Magnifier settings.

Full screen view

In Full screen view the entire screen is magnified. Move the pointer to the edge of the screen to scroll in that direction.

Tip:When using the Full screen view you lot can get a sneak peek of the whole screen by pressing Ctrl + Alt + Spacebar.

Lens view

In Lens view but a small office of the screen, surrounding the mouse pointer, is magnified.

The Lens view

How to resize the Lens view

You tin can resize the Lens using the following keyboard shortcuts:

To decrease the width of the lens, press Shift + Alt + Left arrow key.
To increase the width of the lens: press Shift + Alt + Correct arrow key.
To subtract the height of the lens, press Shift + Alt + Downwards arrow primal.
To increase the pinnacle of the lens, printing Shift + Alt + Up arrow central.

Docked view

In Docked view, the peak third of the screen becomes a magnified view of the lower part of the screen. Equally you move the pointer around the lower office of the screen, the surface area surrounding the arrow is shown magnified in the top third of the screen.

The Docked view

How to resize the Docked view

You can resize the docked viewer by clicking and dragging the lesser edge, or by using the post-obit shortcuts:

To decrease the meridian of the docked view, press Shift + Alt + Down pointer key.
To increase the height of the docked view, press Shift + Alt + Upwards arrow key.

How to undock the docked magnifier to create a floating window

If you wish, yous tin can undock the Magnifier window from the peak edge of the screen and position it elsewhere. To undock the window, click and hold on the magnified area and then drag down. The docked window volition become a small floating window. To reposition floating window, click and agree on the window's title bar then drag information technology to a new location.

How to resize the floating window

Yous can resize the floating window using the following shortcuts:

To subtract the width of the floating window, press Shift + Alt + Left arrow central.
To increase the width of the floating window: press Shift + Alt + Right pointer central.
To decrease the height of the floating window, press Shift + Alt + Downwardly pointer cardinal.
To increment the height of the floating window, press Shift + Alt + Upwards arrow key.

Magnifier settings

The view can also be changed in Magnifier settings. To open Magnifier settings:

Select the settings icon on the Magnifier controls.
Select the Get to settings link.

On theMagnifier settings page, you lot can customise the following settings:

Magnifier options

Change the zoom level - Set the default level of magnification.
Change the zoom increments - Set how much the magnification level should increase/decrease past when you zoom in/out. Past default, the magnification level changes in 100% increments. To alter this, click on the dropdown menu and select the desired level. You can choose from 25% upwards to 400%.
Offset Magnifier subsequently sign in – Tick the checkbox to startMagnifier whenever you sign in to Windows.
Start Magnifier automatically before sign-in for everyone - Tick the checkbox to enable the Magnifier on the login screen.
Smooth edges of images and text - Text and images can become blocky and jagged when magnified. Smoothing attempts to make sure that they remain smooth and easier to read. This selection is enabled by default, click the checkbox to disabled it.
Invert colours – Invert the colours shown in the magnified area. Tick the checkbox to enable.

Magnifier view

To alter the Magnifier view, select the drop-down carte labelled "cull a view" and choose from:

Total screen
Lens
Docked

The settings for each magnifier view

If yous choose Full screen view or Docked view yous tin enable the Magnifier to follow:

Mouse pointer - In Total screen view, the magnified screen gets repositioned when the arrow nears the edge of the screen. This brings content hidden off screen into view. In Docked view the magnified window shows the area around the pointer equally it moves around the screen.
Keyboard focus - With this pick selected, you can navigate the magnified screen using keyboard controls; the pointer keys will scroll the page up and downwardly and left and right, the tab key 'hops' from department to section.
Text cursor - The Magnifier will magnify the expanse effectually the cursor when you are typing.
Narrator cursor - If you use Narrator, the congenital-in screen reader software, the magnifier will follow the Narrator cursor by default.

If yous choose Lens view can set the default lens size. The blue shape, in the image below, is the size of the lens in relation to the whole screen. Arrange the vertical and horizontal sliders to resize information technology.

Reading the screen aloud while using the Magnifier

While using the Magnifier you can have text read aloud by using keyboard shortcuts or the controls embedded on the Magnifier itself.

Keyboard shortcuts for reading the screen aloud

To have Magnifier read from where the cursor is positioned or from the beginning of content that is highlighted: Press Ctrl + Alt + Enter
To terminate Magnifier reading: Press any fundamental
To have Magnifier read from where the mouse pointer is positioned: Press Ctrl + Alt + Left Mouse Click
To read the previous judgement: Press Ctrl + Alt + H
To read the next sentence: Press Ctrl + Alt + G

Using the reading controls on the Magnifier

To have Magnifier read from where the cursor is positioned or from the first of content that is highlighted: Select the Play button
To finish Magnifier reading: Select the Interruption push
To read the previous sentence: Press the Forward button
To read the next sentence: Press the Dorsum push button
To read from where the mouse pointer is clicked: Printing the Pointer push button, then click on the text where you desire to offset reading from.

How to alter the reading speed

Select the Settings icon on the Magnifier controls.
Adjust the slider for Speed.

How to change the vocalism used for reading

Select the Settings icon on the Magnifier controls.
Select the drib-down menu for Voice and choose from the bachelor options.

How to change the modifier cardinal used for reading shortcuts

The default modifier keys used for reading shortcuts are Ctrl + Alt. To modify these:

Select the Settings icon on the Magnifier controls.
Select the Get to settings link.
On the Magnifier settings page, curlicue downward to the Reading department.
Select the drop-downwards menu labelled "Choose a modifier key" and choose from the options.

Keyboard shortcuts to control the Magnifier

Keyboard Shortcut	Action
Plough Magnifier on	Windows logo key and + (plus)
Turn Magnifier off	Windows logo central + Esc
Open magnifier settings	Windows logo key + Ctrl + K
Zoom in	Windows logo key and + (plus)
Zoom out	Windows logo primal and - (minus)
Zoom with mouse curl wheel	Ctrl + Alt + Mouse scroll bicycle
Zoom with trackpad gesture	Ctrl + Alt + Trackpad gyre gesture
Pan left	Ctrl + Alt + Left arrow cardinal
Pan right	Ctrl + Alt + Correct pointer primal
Pan up	Ctrl + Alt + Upwards arrow key
Pan down	Ctrl + Alt + Downwardly arrow central
Capsize colours	Ctrl + Alt + I
Full screen view	Ctrl + Alt + F
Lens view	Ctrl + Alt + Fifty
Docked view	Ctrl + Alt + D
Modify view	Ctrl + Alt + One thousand
Employ the mouse to resize the lens	Ctrl + Alt + R
Decrease lens / docked width	Shift + Alt + Left arrow key
Increment lens / docked width	Shift + Alt + Correct arrow primal
Increase lens / docked height	Shift + Alt + Upwards pointer key
Decrease lens / docked height	Shift + Alt + Down arrow central
Preview the desktop when in Total screen mode	Ctrl + Alt + Spacebar

Reading
Read from where the cursor is positioned or from the starting time of content that is highlighted	Ctrl + Alt + Enter
Stop reading	Printing any key
Read from where the mouse pointer is positioned	Ctrl + Alt + Left Mouse Click
Read the previous sentence	Ctrl + Alt + H
Read the next sentence	Ctrl + Alt + K

Note: If this does non work it could be because someone else manages your reckoner settings (an It department or ambassador). If this is the case, y'all will need to contact them to admission these settings or for further help.

Source: https://mcmw.abilitynet.org.uk/windows-10-magnifying-screen

Posted by: schofieldthatuagaild.blogspot.com